DIRECTIONS FOR USE: SURFACE PREPARATION:
Surface should be dry, clean, and free from contaminants such as dirt, oil, grease, wax, or mill scale. Aluminum surfaces should be primed with a wash primer, and wood should be primed with an oil-based primer.

APPLICATION:
Apply Speedy Clean® Sure Traction Non-Slip Coating in temperatures between 50 °F – 90 °F. The product dries to the touch in 10-20 minutes. Dries hard in 24 hours, depending on weather conditions. Allow to dry at least 24 hours before allowing foot traffic. This product is not recommended for garages or wood surfaces subject to standing water.

CLEANUP:
Use Thinner, Toluene, Xylene or Lacquer Thinner.

KEY BENEFITS:

• Provides a safe, non-slip work space for employees – avoid slip-and-fall problems.
• Ready-to-use in Aerosol or Liquid. No Mixing
• Fast! Surfaces are ready for foot traffic in 24 hours.
• Use on steel, fiberglass, wood, and treated aluminum.

SIZES:
Speedy Clean® Sure Traction Non-Slip Coating is available in 16 ounce aerosol cans and 5-gallon liquid pails for large jobs.

TIPS FOR USE:
Be sure to wear protective gloves and eye protection when applying. Be sure to apply Speedy Clean® Sure Traction Non-Slip Coating under the right conditions: Clean surface, 50 °F - 90 °F. Allow to dry for 24 hours before allowing foot traffic.

NOTES:
This product contains solvents and other chemical ingredients. Adequate health and safety procedures should always be followed. Aerosol can covers 15-20 square feet. A 5-gallon pail of product can cover up to 600 square feet.